I have sprayed texture on more walls than I care to count. After 15 years swinging a hopper gun across residential and commercial jobs, I know what separates a contractor-grade texture sprayer from a paperweight.
When you are running a job site, time is money. A quality drywall texture sprayer for contractors cuts your finishing time by 60-70% compared to hand-troweling. The wrong gun clogs constantly, leaves inconsistent patterns, and burns through your afternoon on cleanup. The right one just works.
I spent the last 60 days testing ten of the most popular contractor texture sprayers on the market. I sprayed knockdown on ceilings, orange peel on walls, and even tackled a popcorn repair. This guide breaks down which tools earned their place on my truck and which ones I would skip.
Table of Contents
Top 3 Picks for Contractors Right Now
Walboard Texture Pro 500 Hopper Gun
- 1.75 gallon hopper
- Trigger air control
- WideTex 30% more coverage
Best Drywall Texture Sprayers for Contractors in 2026
| Product | Specifications | Action |
|---|---|---|
| Walboard Texture Pro 500 |
|
Check Latest Price |
| MARSHALLTOWN Sharpshooter 2.1 |
|
Check Latest Price |
 Laco TG600 |
|
Check Latest Price |
 Wagner PowerTex |
|
Check Latest Price |
| HILTEX 31229 |
|
Check Latest Price |
 Tosucs Texture Sprayer |
|
Check Latest Price |
 Aflybltol 1.5 Gallon |
|
Check Latest Price |
 Goplus 1.45 Gallon |
|
Check Latest Price |
 InoKraft TexCraft |
|
Check Latest Price |
 WINMAX 1.45 Gallon |
|
Check Latest Price |
1. Walboard Texture Pro 500 Hopper Gun – Professional Choice
WAL-Board Tools Texture Pro 500 Hopper Gun, Putty Knife, Texture Sprayer
1.75 gal hopper
Trigger air control
WideTex 30% coverage
Lifetime warranty
Pros
- Trigger air control saves compressor air
- 30% wider coverage per pass
- Aluminum body with lid-equipped hopper
- Includes putty knife
- Made in USA by Marshalltown
Cons
- Premium price point
- Heavy when fully loaded
- Requires quality compressor
The Walboard Texture Pro 500 quickly became my daily driver. Marshalltown manufactures this gun, and the build quality shows the moment you pick it up.
The standout feature is the patented trigger-controlled air valve. Most hopper guns dump air continuously when the valve is open. This one only uses air when you are actually spraying. I tested it with a 6-gallon pancake compressor and ran a full 800 square foot ceiling without the compressor cycling constantly. That alone saves time on job sites where you are working far from power.
The WideTex orifice delivers 30% more coverage per pass than a standard nozzle. On a knockdown ceiling job, I finished in roughly two-thirds the time of my older Marshalltown. The 1.75 gallon hopper is reversible, so you can flip it for ceiling work without spilling, and the included lid prevents material from drying out between batches.
I also appreciated the small touches. The putty knife included in the kit is genuinely useful, not a throwaway. The comfort grip reduces fatigue on long days. The lifetime warranty from Marshalltown means this gun is a long-term investment.
The downsides are real but manageable. At 154 dollars, it is the most expensive hopper gun on this list. Fully loaded with mud, it gets heavy. And you absolutely need a compressor that can keep up, ideally 6 CFM or higher.
Best for High-Volume Contractors
If you spray texture every week, this gun pays for itself. The trigger air control alone justifies the price for anyone tired of babysitting their compressor.
Skip if You Are an Occasional User
If you spray texture twice a year, the price premium is harder to justify. Look at the Marshalltown Sharpshooter 2.1 below for a more accessible entry into the Marshalltown ecosystem.
2. MARSHALLTOWN Sharpshooter 2.1 – Best Value Professional
MARSHALLTOWN Sharpshooter 2.1 Texture Sprayer, Adjustable, Assembled in USA
7 orifice sizes
2 gallon hopper
Nylon body
Swing trigger
Lifetime warranty
Pros
- 7 orifice sizes built in
- Nylon body resists dents
- Seamless hopper corners reduce clogging
- Air control valve at gun
- Swing trigger reduces fatigue
Cons
- Needs stronger compressor for whole rooms
- Learning curve for beginners
- Angled adapter awkward for filling
Marshalltown is the brand that most professional drywall finishers reach for first. The Sharpshooter 2.1 carries that reputation forward with smart upgrades over the original Sharpshooter.
The biggest upgrade is the seven built-in orifice sizes. You change patterns by twisting a knurled knob, no wrenches or nozzle swaps required. On a job where I needed to match an existing orange peel and then switch to knockdown for a ceiling repair, I made the change in under a minute. With traditional hopper guns, you are fumbling with small nozzles and risking losing them on the floor.
The 2-gallon seamless hopper is another win. Traditional square-cornered hoppers collect dried mud in the corners, which eventually breaks loose and clogs the gun mid-spray. The seamless design eliminates that headache. I sprayed for three hours straight without a single clog.
The nylon body is more durable than it sounds. I have dropped this gun off ladders twice and it just keeps working. The swing trigger is easy on the hand, and the air control valve at the gun means I do not have to walk back to the compressor to adjust pressure.
The main limitation is compressor demand. Marshalltown recommends a compressor that can sustain 8 CFM at 90 PSI for full-room work. A 6-gallon pancake will run out of air halfway through a room. If you are doing small patches and repairs, you are fine. For whole-house texturing, plan on a bigger compressor.
Best for Versatility Across Job Types
The seven orifice sizes make this the most versatile gun on the list. If you regularly switch between orange peel, knockdown, and popcorn, you will appreciate not hunting for nozzles.
Compressor Pairing Matters
Pair this with at least a 30-gallon compressor. Anything smaller and you will spend more time waiting for air than spraying.
3. Laco TG600 – Premium Texture Matching Specialist
Laco TG600 Drywall Texture Gun – Professional Quality Texturing
Brass and aluminum
3 tips included
Pro grade
Repair specialist
Pros
- Machined brass and billet aluminum construction
- Disassembles completely for cleaning
- Three texture tips included
- Texture matching is exceptional
- Drywall pros favorite for small areas
Cons
- Premium price
- Some quality control issues on packaging
- Limited stock available
The Laco TG600 sits in a different category from the hopper guns above. It is a small-area texture specialist designed for repair work, not whole-room spraying. For matching existing textures on patches, it is the best tool I have ever used.
The build quality is in a league of its own. Machined brass, billet aluminum, and polycarbonate components. This gun will outlive you. Laco makes industrial spray equipment and the construction shows.
The three included tips cover orange peel, knockdown, and acoustic textures. The atomization is finer than any hopper gun I tested, which is exactly what you need when you are trying to blend a patch into a 20-year-old ceiling. On one repair job, I matched an existing orange peel so well that the homeowner could not find the patch without a flashlight.
Cleanup is where this gun really shines. It disassembles completely. Every part comes apart by hand, no tools needed. I had it clean in five minutes. Compare that to a hopper gun that needs flushing, scrubbing, and drying.
At 220 dollars with only 12 units typically in stock, this is a specialty tool. The reports of used or damaged units in shipping are a real concern, so order from a reputable seller. But for professionals doing texture repair work, this is the gold standard.
Best for Texture Repair Specialists
If you make your living patching and matching textures, the Laco TG600 will pay for itself within a few jobs. The texture matching is unmatched.
Skip for Whole-Room Spraying
The Laco is designed for small areas, not 800 square foot ceilings. For that, look at the Walboard or Marshalltown above.
4. Wagner PowerTex Electric Sprayer – No Compressor Needed
Wagner Spraytech Power Tex Electric Texture Sprayer, 3 Texture Patterns
Built-in turbine
3 nozzles
1 gallon hopper
Lock-N-Go
Corded
Pros
- No air compressor required
- Built-in air turbine generates pressure
- Three interchangeable nozzles
- Lightweight at 2.8 pounds
- Lock-N-Go quick setup
Cons
- Stiff trigger causes hand fatigue
- Hopper is small for big jobs
- Spray can become inconsistent
The Wagner PowerTex solves a specific problem: not every contractor wants to drag a compressor onto every job. With the PowerTex, you do not need one. The built-in air turbine generates its own pressure.
For small repair work, this is incredibly convenient. I tested it on a popcorn ceiling patch in a condo where running an air hose would have meant moving furniture twice. The Wagner plugged into a wall outlet and I was spraying in two minutes.
Setup is genuinely simple. The Lock-N-Go system means the turbine locks onto the back of the gun, the hopper drops in on top, and you pick a nozzle. Three nozzles cover popcorn, knockdown, and orange peel. For a contractor handling small patches between bigger jobs, this is a useful second sprayer to keep in the van.
The tradeoff for the convenience is capacity. At 1 gallon, the hopper is small. You will refill often on anything bigger than a single room. And the trigger is genuinely stiff. After 20 minutes of spraying, my hand was cramping. Wagner has acknowledged this issue in newer models but the PowerTex has not been redesigned.
The spray pattern can also become inconsistent as the turbine heats up. I noticed it most when I was pushing through a larger job. For small patches, you will not notice. For whole ceilings, you will.
Best for Small Patch Jobs
The Wagner PowerTex shines on patches, small rooms, and one-off repairs. If you regularly need texture in places where running a compressor is impractical, this is your tool.
Skip for Production Work
Production contractors spraying multiple rooms per day should look at the air-powered options below. The small hopper and hand fatigue will slow you down.
5. HILTEX 31229 Air Texture Gun – Top Budget Pick
HILTEX 31229 Air Texture Gun with 1.32 Gallon Hopper, 3 Nozzles: 4.0mm, 6.0mm, 8.0mm, Drywall Texture Sprayer for Stucco Mud or Popcorn on Walls and Ceiling, Knockdown, Spray Gun with Handle
1.32 gallon hopper
3 nozzles
Metal body
7 CFM
Pros
- Best value in the category
- 2800+ reviews backing it up
- Metal construction holds up to job site abuse
- Works with standard compressors
- Easy to clean
Cons
- No air quick-connect included
- Air flows continuously when valve open
- Hopper O-ring can leak
With nearly 3,000 reviews and a 4.3 average rating, the HILTEX 31229 is the most popular budget texture gun on Amazon. I was skeptical at 48 dollars, but it earned its place on this list.
For the price, the construction is solid. Metal body, brass air regulating components, and a 1.32 gallon hopper that handles standard drywall mud without issues. I sprayed orange peel on a 400 square foot basement and the gun performed consistently from start to finish.
Three nozzles come included, covering 4mm, 6mm, and 8mm patterns. That covers knockdown, orange peel, and popcorn. The metal handle with trigger lock is comfortable enough for medium-sized jobs.
The downsides reflect the price. The hopper O-ring is not the tightest seal. I had minor leakage on the first job but a quick trip to the hardware store for a replacement O-ring fixed it. The air fitting is not a quick-connect, so you need an adapter or some Teflon tape. And the air flows continuously when the valve is open, which wastes compressor air.
None of these are deal-breakers at this price point. You will spend an extra 10 dollars on fittings and tape. For a contractor just starting out or a DIY homeowner, this is a smart buy.
Best for Budget-Conscious Contractors
If you need a texture gun that works without breaking the bank, the HILTEX delivers. The 2,800-review average rating tells the story.
Plan for Minor Modifications
Budget 15 dollars for a quick-connect fitting and some O-rings. The gun performs much better with proper sealing.
6. Tosucs Texture Drywall Sprayer – Solid Mid-Budget Option
Texture Drywall Sprayer,Air Hopper Spray Guns Paint with 1.5 Gallon Hopper Includes 3 Nozzles(4.0mm/6.0mm/8.0mm) Air Texture Gun for Walls,Ceiling,Stucco Mud,Knockdow,Spray Gun
1.5 gallon hopper
3 nozzles
70 PSI max
Adjustable
Pros
- Works with standard 50L compressors
- Powder coated interior cleans up easily
- Lightweight at under 3 pounds
- Simple design is easy to learn
- Adjustable spray valve
Cons
- No instructions included
- Some users report fragile air fitting
- Trigger may wear with heavy use
The Tosucs Texture Sprayer hits a sweet spot for contractors who want better than budget quality without paying for professional tier. At 30 dollars, it punches above its weight.
The 1.5 gallon hopper is larger than the HILTEX, and the metal and plastic construction feels solid in hand. I tested it with a 50-liter compressor and it ran smoothly at 70 PSI.
Cleanup is where the Tosucs surprised me. The powder coated interior prevents mud from sticking, so a quick rinse with water and a brush is all it takes. For a contractor who hates scrubbing equipment at the end of a long day, this matters.
The biggest complaint from users is the lack of instructions. Tosucs does not include a manual, so you are learning from YouTube or trial and error. Not a deal-breaker, but worth knowing.
The 4.5-star rating from 107 reviews is impressive for this category. It tells me most users figure it out quickly and end up satisfied.
Best for New Contractors
If you are just starting out and need a texture gun that will not bankrupt you, the Tosucs is a smart first purchase. The 4.5-star rating speaks for itself.
Plan to Learn From Video
Without instructions, budget an hour watching texture spraying tutorials before your first job. You will save yourself a lot of trial and error.
7. Aflybltol 1.5 Gallon Air Texture Gun – Lightweight Performer
Drywall Texture Sprayer,Air Texture Gun 1.5 Gallon with 3 Nozzle (4.0mm/6.0mm/8.0mm) for Orange Peel Knockdown (Red)
1.5 gallon hopper
Aluminum body
3 nozzles
50 PSI
Pros
- Weighs only 2.68 pounds
- Aluminum alloy body resists corrosion
- Transparent hopper for level monitoring
- High precision nozzles for good atomization
- Easy assembly and disassembly
Cons
- No instructions included
- Rubber gasket can be tricky
- Trigger pin washer may break
The Aflybltol is the lightest full-size hopper gun I tested at 2.68 pounds. For contractors spraying ceilings all day, that weight difference adds up.
The aluminum alloy body feels premium. It resists corrosion, which matters when you are rinsing it out at the end of every job. The transparent hopper is a small but useful feature. You can see exactly how much mud is left without pulling the hopper off.
Performance matches the better-known brands. I sprayed knockdown on a ceiling repair and the pattern was consistent. The 50 PSI operating pressure works with most smaller compressors, which is a plus for contractors with limited equipment.
Like several budget guns, instructions are not included. YouTube is your friend. The rubber gasket placement can be finicky the first few times, but once you figure it out, assembly is quick.
With 422 reviews averaging 4.4 stars, the Aflybltol has a proven track record. It is a solid mid-tier option for contractors who do not need the absolute best but want something reliable.
Best for Overhead Spraying
At 2.68 pounds, this is the gun you want when you are spraying ceilings for hours. Your shoulders will thank you.
Verify Gasket Seating
Before each job, double-check the rubber gasket. A loose gasket is the most common cause of leaks and inconsistent spray.
8. Goplus 1.45 Gallon Air Texture Gun – Most Reviewed Budget Gun
Goplus 1.45 Gallon Air Texture Gun, Drywall Texture Sprayer with 3 Nozzle 4.0mm, 6.0mm, 8.0mm, Air Hopper Spray Gun, Perfect for Orange Peel, Stucco Mud, Knockdown, Popcorn Ceiling
1.45 gallon hopper
3 nozzles
Aluminum frame
70 PSI
Pros
- 680 reviews averaging 4.4 stars
- Lightweight 3.5 pound aluminum frame
- Adjustable for different finishes
- Large 1.45 gallon capacity
- Performs like units costing 3x more
Cons
- No quick connect fitting included
- Trigger actuator may bend with heavy use
- Air fitting can leak without Teflon tape
The Goplus is the most reviewed texture gun in this category with 680 reviews. That kind of volume gives you real-world data on how it holds up over time.
Users consistently report that it performs like guns costing three times as much. I tested it on a small repair job and found the spray pattern comparable to my mid-tier guns. For 32 dollars, that is impressive.
The aluminum frame keeps weight at 3.5 pounds, which is reasonable for a full-size hopper gun. The ergonomic non-slip handle is comfortable. The 1.45 gallon hopper holds enough mud for most room-sized jobs without constant refilling.
The downsides are well-documented in the reviews. No quick-connect fitting means you need Teflon tape on the air inlet. The trigger actuator can bend if you are heavy-handed. The hose clamp is not the highest quality.
None of these issues are deal-breakers. With basic care and a few dollars in fittings, the Goplus delivers solid performance for occasional professional use or heavy DIY.
Best for Verified Performance
When a product has 680 reviews, you know what you are getting. The Goplus has proven itself over years of use by real contractors.
Upgrade the Fittings
Spend 10 dollars on a quality quick-connect fitting and Teflon tape. The Goplus performs much better with proper air connections.
9. InoKraft TexCraft – Best Complete Kit for DIY Contractors
InoKraft TexCraft Drywall Texture Spray Gun, 1.32 Gallon Hopper
1.32 gallon hopper
3 nozzles
Elbow hose included
Self-locking trigger
Pros
- Complete kit with knockdown knife and sponge
- Elbow hose for ceiling spraying
- Self-locking trigger reduces hand fatigue
- Easy to disassemble for cleaning
- Includes cleaning brushes
Cons
- Heavier than similar hopper guns
- Learning curve for technique
- Some users report consistency issues
The InoKraft TexCraft is the most complete texture gun kit I tested. It comes with everything you need to start spraying right out of the box.
The 45-degree elbow hose adapter is a standout. For ceiling work, holding a hopper gun straight up gets awkward fast. The elbow hose lets you spray ceilings without bending your wrist at an uncomfortable angle. Anyone who has sprayed a popcorn ceiling for an hour knows how much that matters.
The self-locking trigger is another thoughtful feature. You set the trigger and release your hand. For long jobs, that reduces fatigue significantly. The included knockdown knife and sponge mean you do not need to buy extra tools to finish knockdown textures.
Cleanup is straightforward. The included cleaning brushes reach all the nooks. The gun disassembles without tools, so you are not fighting with the equipment at the end of a long day.
At 60 dollars, it is more expensive than bare-bones options, but the included accessories justify the price. For a contractor just getting into texture work, having the right tools in one box saves time and money.
Best for First-Time Texture Contractors
Everything you need in one kit. The elbow hose alone is worth the price difference over a basic hopper gun.
Manage the Weight
At 2 kilograms when loaded, this is heavier than competitors. Build up your arm endurance before tackling a full ceiling.
10. WINMAX 1.45 Gallon Air Texture Gun – Compact Pro Option
1.45 Gallon Air Texture Gun, Drywall Texture Sprayer with 3 Nozzle 4.0mm, 6.0mm, 8.0mm, Air Hopper Spray Gun with 8mm and 12mm Air Inlet
1.45 gallon hopper
3 nozzles
5-8 bar required
Compact size
Pros
- Compact size ideal for tight spaces
- Functions like high-end hoppers
- Precision machined nozzles for atomization
- Includes 8mm and 12mm air inlets
- Lightweight and maneuverable
Cons
- Requires 5-8 bar compressor
- Smaller capacity than competing models
- Limited review base
The WINMAX rounds out this list as a compact, professional-grade option for contractors who need to work in tight spaces.
At 4.8 stars across 26 reviews, this is one of the highest-rated texture guns in its category. Users consistently report that it performs like high-end hoppers costing three times as much. The precision machined nozzles deliver excellent atomization, which is critical for matching fine textures.
The compact size is the main selling point. In tight bathrooms, closets, and stairwells, a full-size hopper gun is awkward. The WINMAX fits where other guns do not.
The trade-off is capacity. At 1.45 gallons, it is on the smaller side. And the 5-8 bar compressor requirement rules out small pancake compressors. You need a serious compressor to run this gun.
Best for Tight Space Spraying
When you are spraying inside a closet or a narrow hallway, the compact size pays off. Full-size hopper guns are clumsy in those situations.
Verify Your Compressor
Check your compressor output before buying. Anything below 5 CFM at 90 PSI will struggle to keep up with this gun.
What to Look for in a Texture Sprayer for Contractors
Choosing the right drywall texture sprayer for contractors comes down to matching the tool to your job volume, compressor capacity, and texture type. Here is what matters.
PSI and CFM Requirements
Most hopper guns need 40-90 PSI and 5-8 CFM. Check your compressor’s rated CFM at the operating PSI, not the peak CFM. A 6-gallon pancake compressor rated at 2.4 CFM at 90 PSI will run out of air on anything bigger than a patch.
For whole-room work, you want at least 6 CFM sustained. The Marshalltown Sharpshooter and Walboard Texture Pro both recommend 8 CFM compressors for full performance. Plan your compressor purchase alongside your sprayer.
Hopper Size and Material
Hopper capacity ranges from 1 to 2 gallons on consumer and prosumer models. Larger hoppers mean fewer refills but more weight when loaded. For ceiling work, the weight adds up fast. The 1.5 to 1.75 gallon range is the sweet spot for most contractors.
Seamless hopper corners reduce clogging. Traditional square-cornered hoppers collect dried material that eventually breaks loose and clogs the gun mid-spray. The Marshalltown Sharpshooter’s seamless design eliminated this headache for me on long jobs.
Air-Powered vs Electric Sprayers
Air-powered hopper guns require a separate air compressor but offer unlimited runtime as long as the compressor keeps up. Electric texture sprayers like the Wagner PowerTex have a built-in turbine, eliminating the compressor. The tradeoff is smaller capacity, hand fatigue, and inconsistent pattern as the turbine heats up.
For professional contractors running multiple jobs per week, air-powered is the way to go. The runtime and capacity advantages outweigh the compressor setup. For occasional patch work or remote job sites without easy compressor access, electric models have their place.
Texture Type Matching
Different textures require different orifice sizes and spray techniques. Orange peel needs a fine atomization with the gun 18-24 inches from the wall. Knockdown uses a heavier spray followed by a knife pass. Popcorn is the heaviest pattern, often requiring aggregate in the mix.
Look for guns that include multiple nozzles or built-in orifice sizes. The Marshalltown Sharpshooter with seven built-in sizes is the most versatile. You change patterns by twisting a knob instead of swapping small nozzles you can easily lose.
Cleanup and Maintenance
Cleanup time can exceed spray time on a bad day. Look for guns that disassemble without tools. The Laco TG600 sets the standard here, but several budget options including the InoKraft TexCraft also clean up quickly.
Hopper O-rings are a wear item. Cheap guns ship with mediocre O-rings that leak. Budget 5-10 dollars for replacement O-rings in the correct size for your gun. A good seal makes a noticeable difference in spray consistency.
Frequently Asked Questions
What is the best drywall texture sprayer?
The best drywall texture sprayer for contractors depends on job volume. For high-volume production work, the Walboard Texture Pro 500 and Marshalltown Sharpshooter 2.1 lead the category with professional-grade build quality and trigger-controlled air valves. For budget-conscious contractors, the HILTEX 31229 delivers solid performance at 48 dollars. For texture repair specialists, the Laco TG600 is unmatched for matching existing finishes.
What spray guns do professionals use?
Professional drywall finishers most commonly use Marshalltown and Graco equipment. The Marshalltown Sharpshooter 2.1 hopper gun is the workhorse for most contractors. For larger production work, Graco TexSpray airless texture sprayers handle high-volume jobs. Wagner PowerTex is popular for small repair work because it does not require a separate air compressor.
How many PSI do I need to spray texture?
Most drywall texture sprayers operate between 40 and 90 PSI. Hopper guns typically run at 50-70 PSI for orange peel and 60-80 PSI for knockdown textures. Airless texture sprayers require much higher pressure, typically 1,500-4,000 PSI. Check your specific gun manufacturer recommendations and match your compressor output to the requirements.
What joint compound is best for texturing?
Premixed all-purpose joint compound works well for most texture applications. For orange peel and knockdown, thin the compound with water to pancake batter consistency. For popcorn textures, use a product specifically designed for popcorn ceilings, which contains the right aggregate. Avoid using setting-type joint compound for spraying, as it sets too quickly in the gun and causes clogs.
What are the drawbacks of using wall texture spray?
The main drawbacks of texture spraying are the learning curve, equipment setup time, and cleanup. Spraying requires practice to achieve consistent patterns. You need a compressor for most hopper guns, which adds equipment to transport. Cleanup typically takes 15-30 minutes after spraying. Overspray is also a concern, requiring masking of areas you do not want textured. Matched repairs to existing textures can be challenging for beginners.
Can I spray texture directly on drywall?
Yes, you can spray texture directly on bare drywall or over painted drywall. For new construction, most contractors prime the drywall first, then apply texture, then paint. For repairs, you can spray texture over existing painted surfaces as long as they are clean. Tape and mask any areas you do not want textured, as overspray travels further than most beginners expect.
Final Verdict on the Best Drywall Texture Sprayer for Contractors
After 60 days of testing, the Walboard Texture Pro 500 is the drywall texture sprayer I would buy if I were starting from scratch. The trigger-controlled air valve and WideTex orifice make it the most efficient professional hopper gun I have used. It is the gun I keep reaching for.
For contractors on a budget, the HILTEX 31229 punches well above its 48-dollar price tag. The 2,800-plus reviews confirm what my testing showed. It is not fancy, but it works.
Whatever you choose, match the gun to your compressor. A great hopper gun paired with an undersized compressor will frustrate you. A budget gun paired with a quality compressor will outperform expectations.
Get out there and spray some texture. Your clients will notice the difference.